Desain dan Analisis Bracket Winch Car Kendaraan Taktis 4x4 Menggunakan Metode Elemen Hingga

المؤلفون

  • Muhammad Rizky Pratama Fakultas Sains dan Teknologi Pertahanan RI Bogor, Indonesia
  • Ilan Ramond Awom Fakultas Sains dan Teknologi Pertahanan RI Bogor, Indonesia
  • Dhanny Ramang R Fakultas Sains dan Teknologi Pertahanan RI Bogor, Indonesia
  • M Daffa Agung Pratama Fakultas Sains dan Teknologi Pertahanan RI Bogor, Indonesia
  • Daffa Muhammad Fauzan Politeknik Negeri Bandung, Indonesia

DOI:

https://doi.org/10.47467/visa.v5i2.7815

الكلمات المفتاحية:

Bracket Winch Car, 4x4 Tactical Vehicle, Finite Element Method, AISI 4340

الملخص

This research designs and analyzes the Bracket Winch Car for a 4x4 tactical vehicle. The Finite Element Method (FEM) is used to obtain the stress results, followed by calculating the Safety Factor using CAD software. The Bracket Winch Car design, made from AISI 4340 material, demonstrates the ability to safely withstand the load of the WARN VR EVO 10-S winch. Simulations are conducted with loading conditions corresponding to the maximum pull weight of the winch, with a value of 44,452.8 N. The safety factor obtained is 1.695, indicating that the design is safe and suitable for use in tactical vehicles.

التنزيلات

بيانات التنزيل غير متوفرة بعد.

التنزيلات

منشور

2025-05-01

كيفية الاقتباس

Pratama, M. R., Awom, I. R., Ramang R, D., Pratama, M. D. A., & Daffa Muhammad Fauzan. (2025). Desain dan Analisis Bracket Winch Car Kendaraan Taktis 4x4 Menggunakan Metode Elemen Hingga. VISA: Journal of Vision and Ideas, 5(2), 988–994. https://doi.org/10.47467/visa.v5i2.7815

إصدار

مجلد 5 عدد 2 (2025): Journal of Vision and Ideas (VISA)

القسم

Articles

الرخصة

الحقوق الفكرية (c) 2025 Muhammad Rizky Pratama, Ilan Ramond Awom, Dhanny Ramang R, M Daffa Agung Pratama

Creative Commons License

هذا العمل مرخص بموجب Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.